|
HMI Touch Screen
The following specifications pertain to the TS8000 series
HMI. SSD Drives retains the right to modify specifications
at any time, without prior notice.
Power Requirements:
+24vdc (+/- 20%) @ 9.5W max (TS8003), 14W max (TS8006), 24W
max (TS8008), 33W max (TS8010) - must use Class 2 or SELV
rated power supply
Power connection is available via removable 3-position
terminal block. Note: The TS8000’s 0v common is not
connected to the unit’s chassis.
Battery:
Lithium CR2025 “button” cell. Typical lifetime of 10 years.
Keypad:
TS8003: 8 user assignable keys, 5 navigation keys, 12
numeric keys, 4 dedicated keys, and 3 soft keys. TS8006: 5
keys for on-screen menus. TS8008: 7 keys for on-screen
menus. TS8010: 8 keys for on-screen menus.
Touchscreen:
Resistive Analog Type (TS8006, TS8008, TS8010).
Memory:
User: 4Mb (TS8003, TS8006) or 8Mb (TS8008, TS8010) onboard
non-volatile flash memory.
Memory Card: CompactFlash Type II slot for Type I and Type
II CF cards.
Communications:
USB Port: Adheres to USB 1.1 specification. Device only
using Type B connection.
Serial Ports: Format and baud rates are individually
programmable up to 115.2kb.
- PGM Port: RS-232 port via RJ-12.
- COMMS Ports: RS-232 port via RJ-12. RS-422/485 port
via RJ-45.
- DH485 TxEn: Transmit Enable; open collector, Voh =
15vdc, Vol = 0.5vdc @ 25mA max.
Ethernet Port: 10/100 Base-T. RJ-45 jack is wired as a
NIC.
Environmental Conditions:
Operating Temperature Range: 0 to 50 deg C.
Storage Temperature Range: -20 to 70 deg C. (TS8003, TS8006)
or 80 deg C. (TS8008, TS8010)
Operating and Storage Humidity: 80% maximum relative
humidity (non-condensing) from
0 to 50 deg C.
Altitude: Up to 2000 meters.
Construction:
Steel rear metal enclosure with NEMA 4X / IP66 aluminum
front plate when correctly fitted with the provided gasket.
Installation Category II, Pollution Degree 2.
Mounting Requirements:
Maximum panel thickness is 0.25 inch (6.3 mm). For NEMA 4X /
IP66 sealing, a steel panel with a minimum thickness of
0.125 inch (3.17 mm) is recommended. Refer to “TS8000
Getting Started” guide (HA421056U001) for cut-out
specifications.
Weight:
TS8003: 1.96 lbs (0.89 kg). TS8006: 3.00 lbs (1.36 kg).
TS8008: 3.84 lbs (1.74 kg). TS8010: 5.53 lbs (2.51 kg).
|
